Remove loose particles, marine growth, chipped paint and
hose off hull.
Apply SeaPro C001 to high wear areas (bow, waterline,
through hull fittings), minimum 2 mils thick. When dry, apply 1-2
coats to entire hull.
When re-painting SeaPro coated hull, merely hose off
with high-pressure hose and without sanding, scraping or, re-paint with
SeaPro C001.
PRIMERS
Aluminum Hulls
Normally primers are not required for SeaPro C001.
However, when used on aluminum hulls, an oil based primer is
necessary to buffer the copper/aluminum in-salt-water reaction.
Fiberglass Hulls
In field tests, SeaPro C001 was applied directly to
fiberglass hulls, some sanded and primed and other untreated gelcoat.
There was no difference in the performance of SeaPro C001.
The fiberglass surface should be smooth before application
Steel Hulls
If bare or polished metal, an oil based, rust resistant
primer should first be applied. If the hull has a sound
paint coating, a primer is not necessary.
Wood Hulls
Primers are not needed as long as the hull is sound and
load-carrying.
COVERAGE
One gallon of SeaPro C001 covers 300 - 400
square feet with 2 coats.
DRYING TIME (Hours) : To Recoat To Launch
90
